Brembo brake pads represent the best in terms of performance, comfort and durability.
Brembo brake pads are available for over 6000 applications, with a wide variety of compounds, from organic resins to sintered and carbon-ceramic pads.
Brembo can cater to the specific needs of all types of motorcycles – from racing and street-legal bikes to city and off-road – and fulfil the expectations of every rider.
Genuine Sinter and Carbon Ceramic
Chosen by motorbike manufacturers worldwide, these materials are developed by Brembo for original equipment.
Genuine brake pads are available in different compounds, each with a different friction coefficient. For sintered material, the coefficient varies from 50 to 99, whereas for carbon ceramic it varies from 10 to 49. The higher the value, the higher the friction coefficient of that particular compound.
Road
SA Compound
This is a sintered compound, specific for front applications, characterised by excellent efficiency in all conditions of use. It is an ideal alternative to original brake pads, both when cold and when hot. This compound ensures good friction coefficient stability in various conditions of use and reduced wear.
LA Compound
LA sintered compound is specific for front applications and can be identified by the small white plate. Made with a compound designed for road use, it is characterised by excellent efficiency in all conditions of use. The Sinter component in this brake pad generates a high friction coefficient both cold and hot, as well as outstanding performance in terms of responsiveness. It also guarantees excellent braking stability and average durability of the brake pad (approximately 30% longer than SA).
CC Compound
This is the evolution of the organic compound, using more carbon. High mileage and good performance both hot and cold, dry and wet, characterise this friction material.
SP Compound
This is a sintered compound, specific for rear applications and stable in all conditions of use. It is characterised by a constant friction coefficient in all conditions of use, combined with low wear which ensures durability and adequate mileage.
Off Road
SX Compound
This sintered compound is designed for both Off-Road and SuperMotard applications. Of all the off-road compounds, it offers the highest friction coefficients, ensuring maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off-road, and on, variations in temperature and the toughest conditions of use (water, sand, mud) which characterise these applications.
SD Compound
This sintered compound provides an excellent compromise with lower friction coefficients compared to the SX compound, but which ensures good stability in various conditions of use. It is particularly suited to Enduro applications, as it ensures superior controllability.
TT Compound
Semi-metallic matrix Carbon Ceramic is suitable for use in off-road applications and in particular on road surfaces with poor grip, thanks to its superior controllability.
